HP XP7 Storage - Manual (Page 159)

¢
For an HP EVA series:
The hardware ID is HP HSV.
6
.
Click the OK button to close the MPIO Properties dialog box.
7
.
Start the removal program.
From Control Panel, choose Add or Remove Programs, and then
Change or Remove Programs. From the list of programs, select
Dynamic Link Manager, and click the Change/Remove button.
8
.
The dlmchkpath utility is automatically executed. If a warning dialog box
appears, follow the procedure below:
¢
Cancel the removal. Reconfigure the system into a single-path
configuration, and then perform the removal again. For details about
the dlmchkpath utility, see The dlmchkpath Utility for Checking HDLM
Paths on page 7-14 .
¢
If a warning dialog box is not displayed, go to the next step.
9
.
Follow the instructions shown in the messages that appear in the window.
If the KAPL09005-E message appears, stop the HDLM manager according
to the procedure in Stopping the HDLM Manager on page 4-15 . After
stopping the HDLM manager, restart the removal program.
10
.
After removal finishes, restart the host.
11
.
Start the Oracle RAC instance of the host.
12
.
For all the hosts that make up the cluster system, perform steps 1
through 11.
13
.
When using Oracle RAC 10g 10.1.0.3.0 or later, or Oracle RAC 11g, you
must return the values of MISSCOUNT and DISKTIMEOUT (the I/O timeout
thresholds of the voting disk) to the values that they were set to before
HDLM was installed.
For details on how to set the value of the MISSCOUNT and DISKTIMEOUT,
contact the company with which you have an Oracle support service
contract.
Removing Hitachi Network Objectplaza Trace Library (HNTRLib2)
When you remove HDLM, if the KAPL09019-E or KAPL09020-E
message is output, follow the directions below to remove HNTRLib2:
1
.
Log on to Windows as a member of the Administrators group.
If the KAPL09019-E message appears during the removal of HDLM, go to
step 2.
If the KAPL09020-E message appears during the removal of HDLM, go to
step 3.
2
.
Execute the following command #1 to unregister program products that
include HNTRLib2:
"C:\Program Files
#2
\HITACHI\HNTRLib2\bin\hntr2cancel.exe"
"Hitachi Dynamic Link Manager"
Creating an HDLM Environment
3-91
Hitachi Dynamic Link Manager (for Windows®) User Guide