HP XP7 Storage User Manual

Page 130

This command checks whether HDLM has already been installed. If

the KAPL09183-I message will appear, the re-installation is

performed.
After the installation is complete, go to step 10.

Specify a license key file or enter the license key by following the

instructions shown in the messages that appear in the window.

If a license key file was saved in step 4, specify that license key file.

If a license key file is not being used, specify the license key directly.

Specify the installation folder by following the instructions shown in the

messages that appear in the window.
The utility for registering HDLM persistent reservation keys (dlmprsvkey)

will be automatically executed. However, creation of the PRSV key might

be unsuccessful if, for example, an NIC does not exist. If the PRSV key is

created with time information only, or if key creation fails, a dialog box

will prompt you to enter the PRSV key.
If this dialog box appears, go to step 8; otherwise, go to step 9.

Enter the PRSV key by following the instructions shown in the dialog box.
The PRSV key is required for the HDLM functions to properly operate.

Also, the value of the PRSV key must be unique for each host.
If the KAPL09128-W message appears, you will need to re-enter the

correct PRSV key.

Follow the instructions shown in the messages that appear in the window.

The PRSV key will be registered before the installation finishes. If the

KAPL09131-W message appears, follow the procedure described in

step 11.

Although a message prompting you to restart the host appears after

the installation has finished, a restart is not necessary.

In the last installation window, the following message might be

output:

When you manage a host by using Global Link Manager and

Windows firewall is enabled on that host, execute the

firewall_setup command to allow a firewall exception.

If Global Link Manager will not be used to manage HDLM, you do not

need to take any action.
To manage HDLM with Global Link Manager, register Firewall

exceptions. For details, see

Check the results of the installation.
If you have performed an unattended installation, check the installation

results from the command prompt.

After the installation finishes, execute the dlmprsvkey utility with the -v

parameter specified.
Execute the following command:

3-62

Creating an HDLM Environment

Hitachi Dynamic Link Manager (for Windows®) User Guide

This manual is related to the following products: