HP XP7 Storage User Manual

Page 202

Valid value

AutoPATH_ID { 000000 - 999999 }(Decimal)

Host_LUN { 0000 - FFFF }(Hexadecimal)

KAPL01001-I The HDLM command completed normally. Operation

name = offline, completion time = yyyy/mm/dd hh:mm:ss

PROMPT>

Reference

Using the view operation together with Windows commands enables you to

filter the path information listed for a specific HBA port or channel adapter

port. For details about the view operation, see

We recommend that you use the following command and verify the

information on the target paths before you execute the offline operation to

place offline all the paths connected to a specific HBA port or channel adapter

port.

Example 1

The following example shows how to filter and display the information on

all paths that pass through the HBA port whose host port number is 0004

and bus number is 0001:

dlnkmgr view -path | find "0004.0001"

The above command will display information on all the paths that pass

through the specified HBA port.

Example 2

The following example shows how to filter and display the information on

all the paths that pass through the channel adapter port 0A of the

Thunder 9500V Series:

dlnkmgr view -path -stname | find "9500V" | find "0A"

The above command will display information pertaining to only those

paths that pass through the specified channel adapter port.

Note:

When the LU dynamic deletion function is used, a path might be deleted due

to an error. If this happens, when you attempt to change the path status, an

error will occur. Confirm that the path of which you attempt to change the

status has been deleted, and then resolve the path error. For details, see

6-10

Command Reference

Hitachi Dynamic Link Manager (for Windows®) User Guide

This manual is related to the following products: