Format, Parameters, Format -18 – HP XP7 Storage User Manual
Page 288: Parameters -18, Below, File, see

Format
installhdlm {-f installation-information-settings-file-name [-
c ]| -v| -h}
Parameters
-f installation-information-settings-file-name
Sets the information required to perform an installation.
For details about the installation-information settings file, see
an Installation-Information Settings File on page 7-18
-c
Checks the contents of the installation-information settings file, the
license, and other necessary information, but does not perform an
installation.
-v
Displays the information that was set during installation.
If the installation was performed without using the unattended installation
functionality, the information specified in a dialog box is displayed.
Example:
PROMPT>installhdlm -v
installdir=C:\Program Files\HITACHI\DynamicLinkManager
storage_emc=n
storage_eva=n
HDLM_core=n
PROMPT>
For an explanation of each display item, see
Defined in the [INSTALLATION_SETTINGS] Section on page 7-19
.
-h
Displays the format of the installhdlm utility.
Contents of an Installation-Information Settings File
For information about setting the installation-information settings file, see
Preparations for Installing HDLM by Performing an Unattended Installation on
[INSTALLATION_SETTINGS] section
This section defines operation information for the installhdlm utility. Do not
modify any definitions of items that are not listed in
Be Defined in the [INSTALLATION_SETTINGS] Section on page 7-19
.
The following table lists and explains the keys that can be defined in the
[INSTALLATION_SETTINGS] section.
7-18
Utility Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide