HP XP7 Storage - Manual (Page 252)

characters after the 9th character are not displayed, and ellipsis (...)
are displayed instead.
¢
For command devices, -CM is added to the end of the emulation type
of the storage system (for example, DF600F-CM).
Parameters Used When Displaying LU Information
When displaying LU information, if the -item parameter, -c parameter, or
the -c -item parameter is specified at the same time as the -lu parameter,
you can add and display items and display a summary of LU information. This
section describes each parameter and the LU information and displayed
items.
Parameters to display LU information:
-lu
When neither the -c nor -item parameter is specified with the -lu
parameter, the information about the LU recognized by HDLM is
displayed. The sorting key is iLU and its configuration information is
displayed for each LU.
Note that:
¢
For the Thunder 9500V series, Lightning 9900V series, Hitachi USP
series, Hitachi AMS2000/AMS/WMS/SMS series, HUS100 series,
Universal Storage Platform V/VM series, and Virtual Storage Platform
series LU information is displayed for each storage system.
¢
For the EMC DMX series and EMC CX series, LU information is
displayed for each vendor ID.
¢
For the HP EVA series, LU information is displayed for each
vendor_ID_product_ID.
For details on the content of each displayed item, see Table 6-19
Displayed LU Information on page 6-69 .
The sub-parameters are:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-31 in
Parameters on page 6-16 .
-hdev host-device-name|-pathid AutoPATH_ID
6-60
Command Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide