HP XP7 Storage - Manual (Page 174)

PROMPT>
The value displayed in HDLM version indicates the HDLM version.
Viewing HDLM Component Information
This section explains how to display HDLM component information.
To display HDLM component information, execute the dlnkmgr command's
view operation with the -sys parameter specified. The following shows an
example in which the command is executed:
PROMPT>dlnkmgr view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster : off
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : on
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Among the displayed items, HDLM Manager, HDLM Alert Driver, and HDLM
Driver indicate the HDLM component information.
Also, you can view information for each HDLM component. Execute the
dlnkmgr command's view operation with the -sys and subsequent parameter
specified. The following shows an example in which the command is
executed:
dlnkmgr view -sys -msrv
dlnkmgr view -sys -adrv
dlnkmgr view -sys -pdrv
4-12
HDLM Operation
Hitachi Dynamic Link Manager (for Windows®) User Guide