HP XP7 Storage - Manual (Page 170)

000009 Online
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
For details on the displayed items and their descriptions, see view (Displays
Information) on page 6-33 .
Initializing Statistical Information for Paths
This section explains how to initialize statistical information (I/O counts and
I/O errors) for all the paths managed by HDLM.
This procedure is useful when you want to check the number of I/O
operations and I/O errors that have occurred since the last time the I/O
counts and I/O errors were initialized to 0.
To initialize statistical information for paths:
1
.
Check the current status of the path.
The following shows how to execute the command:
dlnkmgr view -path
2
.
To initialize statistical information for all the paths managed by HDLM,
execute the dlnkmgr command's clear operation with the -pdst
parameter specified.
The following shows an example in which the command is executed:
PROMPT>dlnkmgr clear -pdst
KAPL01049-I Would you like to execute the operation? Operation
name = clear [y/n]:y
KAPL01001-I The HDLM command completed normally. Operation name
= clear, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
3
.
Check to see whether the statistical information for all the paths has been
initialized.
The following shows how to execute the command:
dlnkmgr view -path
Viewing and Setting Up the Operating Environment
This section explains how to display and set up the HDLM operating
environment.
Viewing the Operating Environment
To display the operating environment, execute the dlnkmgr command's view
operation with the -sys and -sfunc parameters specified.
4-8
HDLM Operation
Hitachi Dynamic Link Manager (for Windows®) User Guide