HP XP7 Storage - Manual (Page 233)

HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 4
The following example shows how to display information about the HDLM
driver:
PROMPT>dlnkmgr view -sys -pdrv
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 5
The following example shows how to display information about the HDLM
license:
PROMPT>dlnkmgr view -sys -lic
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 6
The following example shows how to display information about the audit
log settings:
PROMPT>dlnkmgr view -sys -audlog
Audit Log : off
Audit Log Category : -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 7
The following example shows how to display the number of times the
same path can be used for load balancing:
PROMPT>dlnkmgr view -sys -lbpathusetimes
Times Same Path Was Used : 1
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 8
The following example shows how to display the number of times the
same path can be used for extended load balancing:
PROMPT>dlnkmgr view -sys -expathusetimes
Times Same ExPath Was Used : 100
KAPL01001-I The HDLM command completed normally. Operation name
Command Reference
6-41
Hitachi Dynamic Link Manager (for Windows®) User Guide