HP XP7 Storage - Manual (Page 240)

Specify a drive letter to indicate the desired host device. You cannot
specify the host device unless a drive letter has been assigned. The
host-device-name string is case sensitive.
When you specify this parameter, HDevName is displayed by default. It
is not necessary to specify hd for the -item parameter. If the
command ends with the KAPL01064-W or KAPL01013-E message,
follow the recommended action in the message.
-stname
Use this parameter for the Thunder 9500V series, Lightning 9900V
series, Hitachi USP series, Hitachi AMS2000/AMS/WMS/SMS series,
HUS100 series, Universal Storage Platform V/VM series, or Virtual
Storage Platform series to display the model ID of the storage system
in the product ID element of the DskName field. When this parameter
is omitted, the command displays the product ID or emulation type of
the storage system instead.
For details about the information to be displayed for product IDs, see
Table 6-16 Product ID Displayed by the View -path Operation on page
6-58 .
When you use this parameter, DskName is displayed by default. It is
not necessary to specify dn for the -item parameter.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The parameter values available to specify the second sorting key are:
• pn: Path name
• lu: LU number of the storage system
• cp: Port number of the channel adapter
When the -srt parameter is omitted, the path information is listed in
order of ascending AutoPATH_IDs.
When you use this parameter, the items used for the sorting keys
(DskName, AutoPATH_ID, and the item specified by this parameter)
are displayed by default. Therefore, it is not necessary to specify
these items for the -item parameter.
-exlu
• When an HDLM management-target device is in the EMC DMX
series, EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the iLU are displayed
instead of truncating the iLU to 13 digits. If this parameter is not
specified, any characters after the 13
th digit of the iLU of the EMC
6-48
Command Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide