HP XP7 Storage User Manual

Page 104

If no message appears, go to the next step.

Specify a license key file or enter a license key by following the

instructions shown in the messages that appear in the window.

If a license key file was saved in step 5, specify that license key file.

If a license key file is not being used, specify the license key directly.

Specify the installation folder by following the instructions shown in the

messages that appear in the window.
The utility for registering HDLM persistent reservation keys (dlmprsvkey)

will be automatically executed. However, creation of the PRSV key might

be unsuccessful if, for example, an NIC does not exist. If the PRSV key is

created with time information only, or if key creation fails, a dialog box

will prompt you to enter the PRSV key.
If this dialog box appears, go to step 10; otherwise, go to step 12.

Enter the PRSV key by following the instructions shown in the dialog box.
The PRSV key is required for the HDLM functions to properly operate.

Also, the value of the PRSV key must be unique for each host.

If the KAPL09128-W message appears, you will need to re-enter a correct

PRSV key.
If a message does not appear, go to the next step.

Select an HDLM management-target device only when the OS is one of

the following:

Windows Server 2003 (x86) SP1 or later

Windows Server 2003 (IPF) SP1 or later

Windows Server 2003 (x64)

This OS cannot be used with the EMC DMX series.

The Hitachi storage systems and HP StorageWorks XP Series option

is always selected. To select an EMC DMX series or EMC CX series LU as

the HDLM management-target device, select EMC Symmetrix DMX

Series, CLARiiON CX Series. To select an HP EVA series LU as the

HDLM management-target device, select HP StorageWorks EVA Series.

Follow the instructions shown in the messages that appear in the window.

If a dialog box with the following text appears during installation, and

the Storport Miniport driver is being used as the HBA driver, stop the

HDLM installation. After that, install QFE838894 or a later version of

the Microsoft Storport driver, or install Windows Server 2003 SP1 or

later.
Notes on using a Storport Miniport driver
Read these notes before using a Storport Miniport driver as an

HBA driver.
The file version of the Storport.sys of this system

(Microsoft(R) Storport driver) is n.n.nnnn.n.
When using a Storport Miniport driver as an HBA driver:

3-36

Creating an HDLM Environment

Hitachi Dynamic Link Manager (for Windows®) User Guide

This manual is related to the following products: