Secure web console installation, Combined gsp browser window – HP 9000 rp5400 Servers User Manual

Page 58

Example 4-6 Combined GSP Browser Window

There is not a separate administration "layer" when using the embedded web access of the revision
B GSP. Web console access via the external Secure Web Console required that you first logon to
the SWC, then click on ACCESS CONSOLE. User configuration was also performed at the Secure
Web Console. However, the revision B GSP web console does not require this additional step.
When you point the web browser at the IP of the GSP LAN, you are directly connected to the
GSP. The web console part of the GSP employs the same users as the GSP.

Secure Web Console Installation

The following section describes installation of the HP Secure Web Console on inside of the rear
door of a rack-mounted rp54xx server.

For technical, installation, and configuration instructions for the Secure Web Console, refer to
the following URLs on the Internet:

General information:

http://www.hp.com/

Documentation:

http://docs.hp.com

http://www.hp.com/go/hp9000_servers-docs

Cable Connections