HP 9000 rp5400 Servers - Manual (Page 41)

NOTE: The graphics card must be installed in any Turbo slot while the USB will work in
any slot. To reserve Turbo slots for high performance I/O cards, install the USB card in a
non-Turbo slot
8. At the rear of the chassis, connect the keyboard and mouse cables to the USB card. It does
not matter which connector is used for the keyboard or mouse.
9. Connect one end of the 15-pin video cable connector on the graphics card. This connector
is labeled "Graphics Display" and "Video Out". Connect the other end of this cable to the
graphics monitor.
Installing Graphics 41