beautypg.com

Display board replacement – HP 9000 rp5400 Servers User Manual

Page 126

background image

The next graphic shows the Display Board module.

Display Board Replacement

The Display Board contains the server's ON/OFF switch and five LEDs that indicate server status
when power is applied.

CAUTION:

The Display Board is not a HotSwap or HotPlug unit. Ensure that it is powered-down

prior to removal.

To replace the Display Board, perform the following tasks:

1.

Reconnect the ribbon cable to the Display Board.

2.

Carefully push the Display Board up through the top of the Chassis Fan cavity and insert
the LEDs and On/Off switch into their respective chassis openings.

3.

Replace three T-10 screws.

The following graphic shows the Display Board location (item 1) (looking up from the bottom
of the front of the server).

The next graphic shows the Display Board module.

126

Removing and Replacing Components