HP 9000 rp5400 Servers - Manual (Page 46)

Amber = 10 Base-T Mode
Amber Blinking = 10 Base-T Receiving
7. Green (Lower LED)
Green = Link OK (10/100 Base-T Mode indicated by LED #6)
Green Blinking = Transmitting
8. Ultra-2 SCSI Connector (68-Pin VHDCI SCSI)
Path 0/0/1/0
9. SCSI Mode (Green, Upper LED)
On = Low Voltage Differential (LVD) Mode.
Off = Single Ended Mode.
10. SCSI Terminator Power (Amber, Lower LED)
On = Terminator power present
Off = Terminator power Not present.
Revision B GSP
The following graphic shows the indicators and connectors for the revision B GSP and LAN/SCSI
Core I/O boards.
1. 10/100-Base-T LAN (RJ-45) Connector.
GSP LAN.
2. Green/Red (Upper LED).
Green = GSP Power On.
Red = Guardian Support Processor Test Failed.
3. Green/Yellow, (Lower LED).
Green = 100 Base-T Link OK.
Flashing Green = 100 Base-T LAN Activity.
Yellow = 10 Base-T Link OK.
Flashing Yellow = 10 Base -T LAN Activity.
46 Cable Connections