HP 9000 rp5400 Servers - Manual (Page 40)

5. Grasp the handle on the right rear panel and remove the panel from the side of the chassis.
The 12 PCI slots, numbered 1-12 from bottom to top, will be in view.
6. Remove the PCI slot cover from the slot that will receive the PCI card. To remove the PCI
slot cover, slide the PCI slot cover away from the server.
7. Center the graphics card within the space created by removing the PCI I/O slot cover. Slide
the card toward the edge connectors. Ensure the edge connectors on the card are in alignment
with the connectors of the slot. Apply pressure to the card until it snaps firmly in place.
Repeat process for USB card.
40 Installing Additional Components