HP Hitachi Dynamic Link Manager Software - Manual (Page 98)

Support Cluster : off
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : off
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
19
.
Use the results of the view operation to check the version of the installed
HDLM.
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM
has been installed.
20
.
Use the results of the view operation to check that the programs are
running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
the programs are running correctly.
21
.
Check the path information as described in Checking the Path
Configuration on page 3-68 , and make sure that you have successfully
installed HDLM in a single-path configuration.
22
.
Connect cables to all the HBAs to change the configuration to a multi-path
configuration.
Figure 3-3 Single Path Configuration and Multi-path Configuration on page
3-33 shows a single path configuration and a multi-path configuration.
3-32
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))