HP Hitachi Dynamic Link Manager Software User Manual
Page 245
Parameters to display a summary of LU information:
-lu -c
When the -c parameter is specified with the -lu parameter, a summary
of LU configuration information is displayed on one line. The total number
of paths recognized by HDLM and the number of online paths are
displayed for each LU.
Note that:
¢
For the Thunder 9500V series, Lightning 9900 series, Lightning 9900V
series, Hitachi USP, Hitachi AMS2000/AMS/WMS/SMS series,
Universal Storage Platform V/VM, and Virtual Storage Platform LU
information is displayed for each storage system.
¢
For the EMC DMX series and EMC CX series, LU information is
displayed for each vendor ID.
¢
For the HP EVA series, LU information is displayed for each
vendor_ID_product_ID.
You cannot specify the -c parameter together with the -hdev or -pathid
parameter.
For details on the contents of each display item, see
.
-exlu
•
When an HDLM management-target device is the EMC DMX series,
EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the iLU are displayed
instead of truncating the iLU to 13 digits. If this parameter is not
specified, any characters after the 13
th
digit of the iLU of the EMC
DMX series, EMC CX series, and HP EVA series will not be
displayed. Ellipsis (...) will be displayed instead.
•
When an HDLM management-target device is only the Thunder
9500V series, Lightning 9900 series, Lightning 9900V series,
Command Reference
6-57
Hitachi Dynamic Link Manager User Guide (for Windows(R))