HP Hitachi Dynamic Link Manager Software - Manual (Page 291)

Message ID Message Text Explanation
bb...bb: Parameters that cannot
be specified at the same time
Action
Execute help operation of the
HDLM command (dlnkmgr) to
check which parameters can be
specified at the same time, and
then retry. For details on the help
operation, see help (Displays the
Operation Format) on page 6-4 .
KAPL01035-W The cluster support function is
active, so the load balancing
function is not supported.
Details
The load balancing function
cannot be enabled because MSCS
is installed.
Action
The load balancing function is not
supported in an environment
where MSCS is installed. If you
want to use the load balancing
function, uninstall MSCS.
KAPL01036-E The Offline path cannot be
placed online. PathID = aa...aa
Details
The path could not be recovered.
aa...aa: Path ID (decimal
(base-10) number)
Action
Remove the error in the path, and
then retry.
KAPL01039-W During the online operation
processing of the HDLM
command, a path that cannot be
placed in the Online status was
detected. PathID = aa...aa
Would you like to continue the
processing of the online
operation? [y/n]:
Details
A path that cannot be placed
Online was detected during multi-
path online processing.
To ignore this path and perform
online processing for the next
path, enter y.
To cancel processing, enter n.
aa...aa: Path ID (decimal
(base-10) number)
Action
If you want to continue processing
of the online operation of the
HDLM command for other paths,
enter y. If you want to terminate
processing, enter n. For details on
the online operation, see online
(Places Paths Online) on page
6-10 .
KAPL01040-W The entered value is invalid. Re-
enter [y/n]:
Details
Messages
8-9
Hitachi Dynamic Link Manager User Guide (for Windows(R))