HP Hitachi Dynamic Link Manager Software - Manual (Page 279)

When on is specified for the auto_failback key in the installation-
information settings file
¢
For an upgrade installation or re-installation:
When on is specified for the auto_failback key in the installation-
information settings file, or when automatic failbacks are enabled in
the installation pre-settings.
#5
If you want to enable intermittent error monitoring, specify this key after
specifying the auto_failback and auto_failback_interval keys.
The following shows an example of an installation-information settings file.
[INSTALLATION_SETTINGS]
installfile_location=
workdir=
licensekeyfile=C:\temp\hdlm_license
installdir=D:\Program Files\HITACHI\DynamicLinkManager
storage_emc=n
storage_eva=n
HDLM_core=n
restart=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
intermittent_error_monitor=off
#intermittent_error_monitor_interval=30
#intermittent_error_monitor_number=3
remove_lu=off
remove_lu_force=off
Note:
¢
If a hash mark (#) is placed at the beginning of a line in the
installation-information settings file, that line is assumed to be a
comment.
¢
If you do not want to specify a key or setting value, enter a hash
mark (#) at the beginning of that particular line.
About the Log File
During an unattended installation, information about the installation progress
is output to the log file named installhdlm.log.
The following explains the installhdlm.log file:
Utility Reference
7-25
Hitachi Dynamic Link Manager User Guide (for Windows(R))