beautypg.com

HP Hitachi Dynamic Link Manager Software User Manual

Page 128

background image

18

.

Perform steps 1 to 17 on all the hosts that make up the cluster system.

19

.

Make sure that all the hosts that make up the cluster system have

completely shut down.

20

.

Modify the storage system settings.
Modify the storage system settings by following the procedure described

in the maintenance documentation for that particular storage system.

21

.

Restart each host.

22

.

Log on to Windows again as a member of the Administrators group.

23

.

Execute the dlnkmgr command's view operation to display the status of

each program.
Make sure that on MSCS is displayed in Support Cluster. An example of

executing the dlnkmgr command's view operation is as follows:

>dlnkmgr view -sys

HDLM Version : x.x.x-xx

Service Pack Version :

Load Balance : on(extended lio)

Support Cluster : on MSCS

Elog Level : 3

Elog File Size (KB) : 9900

Number Of Elog Files : 2

Trace Level : 0

Trace File Size(KB) : 1000

Number Of Trace Files : 4

Path Health Checking : on(30)

Auto Failback : on(1)

Remove LU : off

Intermittent Error Monitor : off

HDLM Manager Ver WakeupTime

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss

HDLM Alert Driver Ver WakeupTime ElogMem Size

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128

HDLM Driver Ver WakeupTime

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss

License Type Expiration

Permanent -

KAPL01001-I The HDLM command completed normally. Operation name

= view, completion time = yyyy/mm/dd hh:mm:ss

24

.

Use the results of the view operation to check the version of the installed

HDLM.
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM

has been installed.

25

.

Use the results of the view operation to check that the programs are

running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive,

all the programs are running correctly.

26

.

After the installation finishes, check the path information as described in

Checking the Path Configuration on page 3-68

, and make sure that you

have successfully installed HDLM in a single-path configuration.

3-62

Creating an HDLM Environment

Hitachi Dynamic Link Manager User Guide (for Windows(R))

This manual is related to the following products: