HP Hitachi Dynamic Link Manager Software - Manual (Page 190)

Overview of the HDLM Command dlnkmgr
This section describes how to specify the HDLM command dlnkmgr and its
subcommands (called operations in HDLM).
Command format
Enter the command using the following format:
dlnkmgr operation [parameter [parameter-value]]
dlnkmgr
The command name.
operation
The type of operation entered after dlnkmgr.
parameter
A value required for an operation.
parameter-value
A value required for an operation parameter.
Operations of the dlnkmgr command
Table 6-1 Operations of the dlnkmgr Command on page 6-2 shows the
operations of dlnkmgr and their functions.
Table 6-1 Operations of the dlnkmgr Command
Operation Functions
clear Initializes (0) the statistics (I/O count and I/O errors) of all paths
managed by the HDLM system. For details, see clear (Returns the Path
Statistics to the Initial Value) on page 6-3 .
help Displays the format of the operations used for HDLM. For details, see
help (Displays the Operation Format) on page 6-4 .
offline Places offline an online path or paths. For details, see offline (Places
Paths Offline) on page 6-6 .
online Places online an offline path or paths. For details, see online (Places
Paths Online) on page 6-10 .
set Sets the HDLM operating environment. For details, see set (Sets Up the
Operating Environment) on page 6-15 .
view Displays HDLM program information, path information, LU information,
and HDLM management-target device information. For details, see view
(Displays Information) on page 6-29 .
Note:
¢
If you are using Windows Server 2003, execute HDLM commands as a
member of the Administrators group.
6-2
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))