HP Hitachi Dynamic Link Manager Software - Manual (Page 201)

For target-ID, specify the target ID portion of PathName. Leading zeroes
can be omitted from the target ID (0000000000000001 and 1 are the
same value). The parameter is not case sensitive.
For host-LU-number, specify the host LU number portion of PathName.
Leading zeroes can be omitted from the host LU number (0001 and 1 are
the same value).
To display HBAPortWWN and PathName, execute the view operation as
follows:
>dlnkmgr view -path -hbaportwwn
For details on how to execute the view operation and display the HBA
port WWN and path name, see Parameters Used When Displaying Path
Information on page 6-38 in Parameters on page 6-31 .
Example
The following shows an example of placing online the paths for which
the HBA port WWN is 10000000C93213BA, target ID is
0000000000000001, and host LU number is 0000 while confirming
command operation.
>dlnkmgr online -path –hbaportwwn 10000000C93213BA –tid 1 –
hlun 0
KAPL01050-I The currently selected paths will be changed to
the Online status. Is this OK? [y/n]: y
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example
The following example shows how to place a path, whose
AutoPATH_ID is 000002, online without asking for confirmation of
command execution from the user:
>dlnkmgr online -pathid 2 -s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
>
To Display the Format of the Online Operation
-help
Displays the format of the online operation.
Example
The following example shows how to display the format of the online
operation:
>dlnkmgr online -help
Command Reference
6-13
Hitachi Dynamic Link Manager User Guide (for Windows(R))