Notes on windows, Notes on windows -16 – HP Hitachi Dynamic Link Manager Software User Manual
Page 82

•
When you use HDLM in a cluster configuration, you must install the same
version of HDLM on all the nodes that make up the cluster. If different
versions of HDLM are installed, the cluster system might not operate
correctly. If the HDLM Version and Service Pack Version, which are
displayed by executing the following command, are the same, then the
versions of HDLM will also be the same:
>dlnkmgr view -sys -sfunc
Notes on Windows
•
When you upgrade or re-install Windows Server 2003 or install a Windows
Server 2003 service pack, be sure to uninstall HDLM beforehand. If the
OS is upgraded or re-installed while HDLM is installed, HDLM might not be
able to manage paths properly because OS device drivers that affect
HDLM operations will be updated.
•
We recommend that you install Windows and HDLM on an internal host
disk. If you install them on an HDLM management-target disk, the
following problems might occur:
¢
You might not be able to store the OS crash-dump and error
information on the disk.
¢
After uninstalling HDLM, some files might not be deleted correctly.
•
When restoring a Windows system disk from a backup, restore the disk to
a single-path configuration.
After restoring the disk, confirm that HDLM is running properly, and then
change to a multi-path configuration.
•
If the size of the Path system environment variable is 1024 bytes or
more, the HDLM manager might not be able to start. When the HDLM
manager fails to start, the following message is output to the Windows
event log (system):
Source: Service Control Manager
Type: Error
Event ID: 7000
Description: DLMManager service could not be started for the
following reason: The service did not respond to the start
request or control request within the specified period.
If the HDLM manager fails to start, delete all unnecessary character
strings in the path so that the size of the Path system environment
variable is 1024 bytes or less:
For Windows Server 2003 (excluding the x86 edition) or Windows Server
2008 (excluding the x86 edition):
Windows-installation-drive:\Program Files (x86)\Common Files
\Hitachi
Windows-installation-drive:\Program Files (x86)\HDVM\HBaseAgent
\bin
3-16
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))