HP Hitachi Dynamic Link Manager Software - Manual (Page 205)

-lbtype {rr|exrr|lio|exlio|lbk|exlbk}
Specify the algorithm to be used for load balancing.
rr: The Round Robin algorithm
exrr: The Extended Round Robin algorithm
lio: The Least I/Os algorithm
exlio: The Extended Least I/Os algorithm
lbk: The Least Blocks algorithm
exlbk: The Extended Least Blocks algorithm
The type of algorithm specified by the -lbtype parameter remains
stored in the system, even when you disable the load balancing
function by specifying -lb off. Therefore, if you re-enable the load
balancing function without specifying an algorithm, load balancing will
be performed according to the algorithm that is stored in the system.
-ellv error-log-collection-level
Specify the level of error information you want to collect for an error log.
The following shows the log files in which an error log collection level can
be set:
HDLM manager logs:
dlmmgrn.log (n indicates a file number from 1 to 16)
HDLM GUI logs:
dlmguin.log (n indicates a file number of 1 or 2)
Table 6-3 Values of the Error Log Collection Level on page 6-17
shows the values of the error log collection level. If an error occurs,
you may have to set the error log collection level to 1 or higher to
collect log information.
Table 6-3 Values of the Error Log Collection Level
Value Description
0 Collects no error log.
1 Collects error information for the Error or higher level.
2 Collects error information for the Warning or higher level.
3 Collects error information for the Information or higher level.
4 Collects error information for the Information or higher level
(including maintenance information).
The higher the error log collection level value, the more log information
will be output. As the amount of log information that is output increases,
the amount of time before existing information will be overwritten
becomes shorter.
Example
>dlnkmgr set -ellv 1
Command Reference
6-17
Hitachi Dynamic Link Manager User Guide (for Windows(R))