HP Hitachi Dynamic Link Manager Software - Manual (Page 332)

Message ID Message Text Explanation
(base-10) number)), partition
(cc...cc: Partition sequence
number (decimal (base-10)
number)), and device object
address (aa...aa: Device object
address (hexadecimal number)) is
the first path for the LU (including
the non-HDLM target device).
Action
None.
KAPL05013-I The device (aa...aa) for Disk
(bb...bb), Partition (cc...cc) was
removed from the mounted
drive.
Details
The device object corresponding
to the disk (bb...bb: Disk
sequence number (decimal
(base-10) number)), partition
(cc...cc: Partition sequence
number (decimal (base-10)
number)), and device object
address (aa...aa: Device object
address (hexadecimal number)) is
the second or a subsequent path
for the LU.
Action
This is normal. If the target drive
cannot be referenced, check the
disk configuration.
KAPL05014-I The device object (aa...aa) was
registered as the path (bb...bb).
Details
The path (bb...bb: Core logic path
identifier (hexadecimal number))
of the device object (aa...aa:
Filter driver management table
address (hexadecimal number))
was successfully registered into
the core logic.
Action
None.
KAPL05032-I The path health checking for the
path (aa...aa) completed
normally. (bb...bb,cc...cc)
Details
aa...aa: Path ID (hexadecimal
number)
bb...bb: Disk sequence number
(decimal (base-10) number)
cc...cc: Degree of progress in
health checking (hexadecimal
number)
Action
None.
KAPL05033-W The path health checking for the
path (aa...aa) failed.
(bb...bb,cc...cc,dd...dd)
Details
aa...aa: Path ID (hexadecimal
number)
8-50
Messages
Hitachi Dynamic Link Manager User Guide (for Windows(R))