HP Hitachi Dynamic Link Manager Software - Manual (Page 231)

Use this parameter to sort the path information in ascending order,
according to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The parameter values available to specify the second sorting key are:
• pn: Path name
• lu: LU number of the storage system
• cp: Port number of the channel adapter
When the -srt parameter is omitted, the path information is listed in
order of ascending AutoPATH_IDs.
When you use this parameter, the items used for the sorting keys
(DskName, AutoPATH_ID, and the item specified by this parameter)
are displayed by default. Therefore, it is not necessary to specify
these items for the -item parameter.
-exlu
• When an HDLM management-target device is in the EMC DMX
series, EMC CX series, or HP EVA series:
If this parameter is specified, all 32 digits of the iLU are displayed
instead of truncating the iLU to 13 digits. If this parameter is not
specified, any characters after the 13
th digit of the iLU of the EMC
DMX series, EMC CX series, and HP EVA series will not be
displayed. Ellipsis (...) will be displayed instead.
• When an HDLM management-target device is configured for only
the Thunder 9500V series, Lightning 9900 series, Lightning 9900V
series, Hitachi USP, Hitachi AMS2000/AMS/WMS/SMS series,
Universal Storage Platform V/VM, or Virtual Storage Platform:
16 digits are displayed for the iLU even if this parameter is
specified.
-t
Omits the title for each information item.
Example
In the following example, IO-Count is selected as the display item
and the path information is sorted in ascending order by LUs.
Command Reference
6-43
Hitachi Dynamic Link Manager User Guide (for Windows(R))