HP Hitachi Dynamic Link Manager Software - Manual (Page 336)

KAPL08001 to KAPL09000
Message ID Message Text Explanation
KAPL08019-E The path (aa...aa) detected an
error (bb...bb). (cc...cc)
Details
An error occurred in the path. The
error is most likely due to a
disconnected cable.
aa...aa: Path identifier
(hexadecimal number)
bb...bb: Error code (hexadecimal
number)
¢
When the Windows plug-and-
play functionality deletes the
SCSI device from Windows
0x00000000 is displayed.
¢
When a path error is detected
by path health checking or an
online operation
0x000F0000 is displayed.
¢
When a path error is detected
through an I/O error
The OS error code is
displayed.
cc...cc: Address of the filter driver
in which the error
occurred(character string)
Action
Check the path in which the error
was detected.
KAPL08022-E A path error occurred.
ErrorCode = aa...aa, PathID =
bb...bb, PathName =
cc...cc.dd...dd.ee...ee.ff...ff,
DNum = gg...gg, HDevName =
hh...hh
Details
A physical or logical error occurred
in the path.
aa...aa: OS error code
(hexadecimal number)
¢
When the Windows plug-and-
play functionality deletes the
SCSI device from Windows
0x00000000 is displayed.
¢
When a path error is detected
by path health checking or an
online operation
0x000F0000 is displayed.
¢
When a path error is detected
through an I/O error
The OS error code is
displayed.
bb...bb: Path ID (same as PathID
of view -path) (decimal
(base-10) number)
8-54
Messages
Hitachi Dynamic Link Manager User Guide (for Windows(R))