HP Hitachi Dynamic Link Manager Software - Manual (Page 351)

Message ID Message Text Explanation
Action
¢
In installhdlm utility for
installing HDLM:
After the computer restarts,
make sure that HDLM is
running correctly.
¢
In uninstallhdlm utility for
uninstalling HDLM:
None.
KAPL09187-W No parameter is specified. Details
No installation-information
settings file has been specified in
the installhdlm utility for
installing HDLM.
Action
Make sure that an actual
installation-information settings
file for the installhdlm utility is
appropriate, and then try again.
KAPL09188-W Too many parameters are
specified.
Details
More than two parameters have
been specified for the
installhdlm utility for installing
HDLM.
More than four parameters have
been specified for the
uninstallhdlm utility for
uninstalling HDLM.
Action
Make sure that the parameters for
the installhdlm or
uninstallhdlm utilities are
appropriate, and then try again.
For details on the installhdlm
utility, see The installhdlm Utility
for Installing HDLM on page 7-16 .
For details on the uninstallhdlm
utility, see The uninstallhdlm
Utility for Uninstalling HDLM on
page 7-26 .
KAPL09189-W The parameter contains an
incorrect value. (Value =
aa...aa)
Details
Either -f or -h must be specified
as the first parameter for the
installhdlm utility for installing
HDLM.
-s, -r, -w or -h must be specified
as parameters for the
uninstallhdlm utility for
uninstalling HDLM.
Messages
8-69
Hitachi Dynamic Link Manager User Guide (for Windows(R))