HP Hitachi Dynamic Link Manager Software - Manual (Page 278)

Key name #1 Description #2
Necessity of
definition Maximu
m
charact
er
length #
3
New
installat
ion
Upgrade
installat
ion or
Re-
installat
ion
on: Enable the LU dynamic
removal function.
off: Disable the LU dynamic
removal function (default).
remove_lu_force Using either of the following
values, specify whether to remove
an LU from the HDLM
management target list when all
paths to the LU are disconnected,
even when there are Offline(C)
paths:
#2
on: Remove the LU.
off: Do not remove the LU
(default).
Optional Optional 3
Legend:
Optional:
¢
For a new installation:
If no key or setting value is specified, the installer uses the default
values.
¢
For an upgrade installation or re-installation:
If no key or setting value is specified, the installer uses the old HDLM
setting values.
#1
Keys that are not specified for an upgrade installation or re-installation
inherit the current key settings.
#2
Specifying an invalid value results in an error.
For details about the function settings, see
set (Sets Up the Operating
Environment) on page 6-15 .
#3
If the value exceeds the maximum value, an error occurs.
#4
You can specify this key only in the following cases:
¢
For a new installation:
7-24
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))