KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 82)

6
OPERATION
82
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
6.4.2 Test
Use this procedure to test the loop current. « xx » in the illustrations shows that you can change
the value or the parameter. Push the keypad buttons in the correct sequence:
Procedure
Screen Step Description
Default screen.
• [>>>>], [ ] and [>>>>].
• Enter the password: [> >>>], [^ ^ ^ ^], [ ], [ ], [> >>>]
and [^ ^ ^ ^].
• [^ ^ ^ ^]
• [ ].
• [>>>>].
• [>>>>].
• [ ] to decrease the value or [ ] to
increase the value.
• [^ ^ ^ ^] to confirm.
This step sets the loop current value. Make
a selection from 3.5, 4, 6, 8, 10, 12, 14, 16,
18, 20 or 22 mA.
• [^ ^ ^ ^] 3 times to go back to the default
screen.
The loop current goes back to initial value.
Default screen.