KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 73)

OPERATION
6
73
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
This is what you see when you select a menu item that has a value. The functions of the buttons
are given in the table that follows:
Function of buttons in menu items that have values
How to save settings changed in the supervisor menu (menu 2.0.0)
• When you have changed parameters in all the necessary menu items, push [^ ^ ^ ^] to accept the
new parameter.
• Push [^ ^ ^ ^] to go back to the "STORE" screen.
• The device will ask you to save or cancel your settings. Push [ ] or [ ] to select STORE YES STORE YES STORE YES STORE YES or
STORE NO STORE NO STORE NO STORE NO. Push [^ ^ ^ ^] to accept or reject the new settings.
i The display goes back to Normal mode.
Values in menu items
Figure 6-3: Values in menu items
1 Menu item with values stored at this time (first screen)
2 Push [>
>> >] again to change the values. A cursor shows on the first digit.
3 Menu item name
4 Cursor on the selected digit
Button Description Function
Right • Enter the menu item and see the value stored at this time.
• Enter the menu item configuration level to change the value.
• Move the cursor to the next digit on the right. If the cursor is on
the last digit, push [>
>>>] again to go back to the first digit.
Enter /
Esc (Escape)
Accept the value and go back to the sub-menu.
Down Decrease the digit value.
Up Increase the digit value.