KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 13)

DEVICE DESCRIPTION
2
13
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
2.2 Device description
The TDR level transmitter is designed to measure the distance, level, mass and volume of
liquids, pastes, slurries, granulates and powders.
TDR level transmitters use a probe to guide a signal to the surface of the measured product. The
device has a large choice of probes. Thus, it can measure most products in difficult conditions.
For more data, refer to
Technical data on page 115.
You can order these accessories:
• RS232 / HART ® converter (VIATOR).
• USB / HART ® converter (VIATOR).
2.3 Visual Check
INFORMATION!
For more data on accessories, refer to Accessories on page 160
.
INFORMATION!
Inspect the cartons carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
Figure 2-2: Visual check
1 Device nameplate (for more data, refer to Non-Ex nameplate on page 14)
2 Process connection data (size and pressure rating, material reference and heat number)
3 Gasket material data - refer to the illustration that follows