KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 16)

3
INSTALLATION
16
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
3.1 General notes on installation
3.2 Storage
• Store the device in a dry and dust-free location.
• Store the device in its original packing.
INFORMATION!
Inspect the cartons carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Do a check of the packing list to make sure that you have all the elements given in the order.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
WARNING!
Do not keep the device in a vertical position. This will damage the probe and the device will not
measure correctly.
Figure 3-1: Storage conditions
1 Do not bend rod and coaxial probes - support here
2 Storage temperature range: -50…+85°C / -60…+185°F (min. -40°C / -40°F for devices with the integrated LCD display
option)