KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 117)

TECHNICAL DATA
8
117
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
Input and output
Measured variable Time between the emitted and received signal
Current output / HART Current output / HART Current output / HART Current output / HART®
Output signal
4…20 mA HART ® or 3.8…20.5 mA acc. to NAMUR NE 43 1
Resolution ± 3 µA
Temperature drift (analog) Typically 50 ppm/K
Temperature drift (digital) Max. ±15 mm for the full temperature range
Error signal options High: 22 mA; Low: 3.6 mA acc. to NAMUR NE 43; Hold (frozen value - not available if
the output agrees with NAMUR NE 43) 2
PROFIBUS PA PROFIBUS PA PROFIBUS PA PROFIBUS PA
Type PROFIBUS MDP interface that agrees with IEC 61158-2 with 31.25 kbit/s; voltage
mode (MDP = Manchester Coded Bus Powered)
Function blocks 1 × Physical Block, 1 × Level Transducer Block, 4 × Analog Input Function Blocks
Device power supply 9...32 VDC - bus powered; no additional power supply required
Polarity sensitivity No
Basic current 15 mA
FOUNDATION FOUNDATION FOUNDATION FOUNDATION™ fieldbus fieldbus fieldbus fieldbus
Type
Physical layer FOUNDATION™ fieldbus protocol that agrees with IEC 61158-2 and FISCO model
Communication standard H1
ITK version 6.1
Function blocks 1 × Resource Block (RB), 3 × Transducer Blocks (TB), 3 × Analog Input Blocks (AI), 1
x Proportional Integral Derivative Block (PID)
Analog Input Block: 30 ms
Proportional Integral Derivative Block: 40 ms
Device power supply Not intrinsically safe: 9...32 VDC
Intrinsically safe: 9...24 VDC
Basic current 14 mA
Maximum error current 20.5 mA (= basic current + error current = 14 mA + 6.5 mA)
Polarity sensitivity No
Minimum cycle time 250 ms
Output data Level, distance, ullage conversion, level conversion
Input data None
Error current FDE Typically 0 mA (FDE =Fault Disconnection Electronic)
Link Master function Supported
Display and user interface
User interface options LCD display (128 × 64 pixels in 8-step greyscale with 4-button keypad)
Languages 9 languages are available: English, German, French, Italian, Spanish, Portuguese,
Japanese, Chinese (simplified) and Russian
Approvals and certification
CE This device fulfils the statutory requirements of the EC directives. The
manufacturer certifies successful testing of the product by applying the CE mark.
Vibration resistance EN 60721-3-4 (1...9 Hz: 3 mm / 10...200 Hz:1g; 10g shock ½sinus: 11 ms)