KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 28)

3
INSTALLATION
28
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
3.7 Installation recommendations for solids
3.7.1 Nozzles on conical silos
We recommend that you prepare the installation when the silo is empty.
DANGER!
Risk of electrostatic discharge (ESD): The device is resistant to electrostatic discharges of up to
30 kV, but it is the responsibility of the fitter and the user to prevent ESD.
CAUTION!
Install the device at the correct location to measure level correctly and prevent too much
bending and traction. If necessary, attach the probe to the bottom of the tank.
Figure 3-20: Installation recommendations for solids
a ≥ 300 mm / 12¨
d ≥ 300 mm / 12¨
Figure 3-21: Do not install the probe near to a product inlet