KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 7)

SAFETY INSTRUCTIONS
1
7
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
1.1 Software history
"Firmware revision" agrees with NAMUR NE 53. It is a series of numbers used to record the
revision status of embedded software (firmware) in electronic equipment assemblies. It gives
data on the type of changes made and the effect that changes have on compatibility.
Data about software revisions is shown in menu 1.1.0 IDENT. For more data, refer to Function
description on page 74. If it is not possible to refer to the device menu, record the serial number
of the device (given on the device nameplate) and speak to the supplier.
1.2 Intended use
This TDR level transmitter measures distance, level, mass and volume of liquids, pastes,
slurries, granulates and powders.
It can be installed on tanks, silos and open pits.
Release date Printed circuit
assembly Firmware
revision Harware
revision Changes and
compatibility Documentation
2012-06-18 Converter 1.06.02 4000342401k - HB OPTIFLEX 2200 R01
HB OPTIFLEX 2200 R02
Sensor 1.21.02 4000357001o
HMI (LCD display option) 1.00.02 4000487601m
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.