KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 127)

TECHNICAL DATA
8
127
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
Measurement limits (dead zone) in mm and inches
Measurement limits (non-linearity zone) in mm and inches
80 is ε
r
of water; 2.3 is ε
r
of oil
Coaxial probe
Figure 8-10: Measurement limits
1 Device with a coaxial probe
2 Top dead zone:
Top dead zone: Top dead zone: Top dead zone: Top part of the probe where measurement is not possible
3 Top non-linearity zone: Top non-linearity zone: Top non-linearity zone: Top non-linearity zone: Top part of the probe with a lower accuracy of ±30 mm / ±1.18¨
4 Bottom non-linearity zone: Bottom non-linearity zone: Bottom non-linearity zone: Bottom non-linearity zone: Bottom part of the probe with a lower accuracy of ±30 mm / ±1.18¨
5 Bottom dead zone: Bottom dead zone: Bottom dead zone: Bottom dead zone: Bottom part of the probe where measurement is not possible
6 Gas (Air) Gas (Air) Gas (Air) Gas (Air)
7 Product Product Product Product
8 L, Probe length L, Probe length L, Probe length L, Probe length
9 Tank Height Tank Height Tank Height Tank Height
10 Minimum distance from the probe to a metallic tank wall: Minimum distance from the probe to a metallic tank wall: Minimum distance from the probe to a metallic tank wall: Minimum distance from the probe to a metallic tank wall: Coaxial probe = 0 mm / 0¨
Dead zone ε
r
= 80 ε
r
= 2.3
Top 2 Bottom 5 Top 2 Bottom 5
[mm] [inches] [mm] [inches] [mm] [inches] [mm] [inches]
Coaxial 150 5.91 0 0 200 7.87 20 0.79
Non-linearity
zone
ε
r
= 80 ε
r
= 2.3
Top 3 Bottom 4 Top 3 Bottom 4
[mm] [inches] [mm] [inches] [mm] [inches] [mm] [inches]
Coaxial 0 0 50 1.97 0 0 150 5.91