KROHNE OPTIFLEX 1300C EN - Manual (Page 85)

OPERATION
6
85
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
Data dependencies for the 20 mA settings of outputs 1 and 2
Output function Minimum value Maximum value Default
Level >4 mA Setting for Level Tank Height + TBO + RO 1 Tank height +
TBO - BD 2
Volume >4 mA Setting for Volume Max. value in the volume table Max. value in the
volume table
Mass >4 mA Setting for Mass Max. value in the mass table Max. value in the
mass table
Distance >4 mA Setting for Distance Tank Height + TBO + RO 1 Tank height + RO
3
Interface Level >4 mA Setting for Interface Level Tank height + TBO + RO 1 Tank height +
TBO - BD 2
Interface Distance >4 mA Setting for Interface
Distance
Tank height + TBO + RO 1 Tank height + RO
3
Interface Volume >4 mA Setting for Interface
Volume
Max. value in the volume table Max. value in the
volume table
Interface Mass >4 mA Setting for Interface Mass Max. value in the mass table Max. value in the
mass table
Ullage Volume >4 mA Setting for Ullage Volume Max. value in the volume table Max. value in the
volume table
Ullage Mass >4 mA Setting for Ullage Mass Max. value in the mass table Max. value in the
mass table
Layer >4 mA Setting for Layer Tank height + TBO + RO 1 Tank height - BD
4
Layer Volume >4 mA Setting for Layer Volume Max. value in the volume table Max. value in the
volume table
Layer Mass >4 mA Setting for Layer Mass Max. value in the mass table Max. value in the
mass table
1 RO = Reference Offset (C1.10). TBO = Tank Bottom Offset (C.1.11).
2 BD = Blocking Distance (C.1.9). TBO = Tank Bottom Offset (C.1.11).
3 RO = Reference Offset (C1.10)
4 BD = Blocking Distance (C.1.9)