KROHNE OPTIFLEX 1300C EN - Manual (Page 133)

TECHNICAL DATA
8
133
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
Flange versions for double rod and double cable probes Flange versions for double rod and double cable probes Flange versions for double rod and double cable probes Flange versions for double rod and double cable probes
EN 1092-1 DN50...80 in PN40 (Form B1), DN100…200 in PN16 or PN40 (Form B1), DN50...150
in PN63 or PN100 (Form B1); others on request
Optional flange facing: Forms C, D, E and F
ASME B16.5 2¨…8¨ in 150 lb, 2¨...6¨ in 300 lb RF, 2¨...4¨ in 600 lb RF; 3¨...4¨ 900 lb RF, 2¨ in 900 lb
or 1500 lb RJ; others on request
Optional flange facing: RJ (Ring Joint)
JIS B2220 50…100A in 10K; others on request
Flange versions for single cable Ø8 mm / 0.32 Flange versions for single cable Ø8 mm / 0.32 Flange versions for single cable Ø8 mm / 0.32 Flange versions for single cable Ø8 mm / 0.32¨ cable probes cable probes cable probes cable probes
EN 1092-1 DN40...80 in PN40 (Form B1), DN100…200 in PN16 or PN40 (Form B1), DN40…150
in PN63 or PN100 (Form B1); others on request
Optional flange facing: Forms C, D, E and F
ASME B16.5 1½¨…8¨ in 150 lb, 1½¨...6¨ in 300 lb RF, 1½¨...4¨ in 600 lb RF; 3¨...4¨ 900 lb RF,
1½¨...2¨ in 900 lb or 1500 lb RJ; others on request
Optional flange facing: RJ (Ring Joint)
JIS B2220 40…100A in 10K; others on request
Flange versions for single cable Ø2 mm / 0.08 Flange versions for single cable Ø2 mm / 0.08 Flange versions for single cable Ø2 mm / 0.08 Flange versions for single cable Ø2 mm / 0.08¨ probe probe probe probe
EN 1092-1 DN25...80 in PN40 (Form B1), DN100…200 in PN16 or PN40 (Form B1), DN40…150
in PN63 or PN100 (Form B1); others on request
Optional flange facing: Forms C, D, E and F
ASME B16.5 1¨…8¨ in 150 lb RF, 1½¨...6¨ in 300 lb RF, 1¨...4¨ in 600 lb RF, 3¨...4¨ in 900 lb RF,
1¨...2¨ in 900 lb or 1500 lb RJ, 1¨ in 2500 lb RJ; others on request
Optional flange facing: RJ (Ring Joint)
JIS B2220 40…100A in 10K; others on request
Flange versions for other probes Flange versions for other probes Flange versions for other probes Flange versions for other probes
EN 1092-1 DN25...80 in PN40 (Form B1), DN100…200 in PN16 or PN40 (Form B1), DN25…150
in PN63 or PN100 (Form B1); others on request
Optional flange facing: Forms C, D, E and F
ASME B16.5 1¨…8¨ in 150 lb RF, 1½¨...6¨ in 300 lb RF, 1¨...4¨ in 600 lb RF, 3¨...4¨ in 900 lb RF,
1¨...2¨ in 900 lb or 1500 lb RJ; others on request
Optional flange facing: RJ (Ring Joint)
JIS B2220 40…100A in 10K; others on request
Other options for single and double rod probes Other options for single and double rod probes Other options for single and double rod probes Other options for single and double rod probes
SMS Available on request
Tri-clamp Available on request
Others Others on request
Electrical connections
Power supply Terminals output 1 Terminals output 1 Terminals output 1 Terminals output 1 – Non-Ex / Ex i: Non-Ex / Ex i: Non-Ex / Ex i: Non-Ex / Ex i:
14…30 VDC; min./max. value for an output of 22 mA at the terminal
Terminals output 1 Terminals output 1 Terminals output 1 Terminals output 1 – Ex d: Ex d: Ex d: Ex d:
20…36 VDC; min./max. value for an output of 22 mA at the terminal
Terminals output 2 Terminals output 2 Terminals output 2 Terminals output 2 – Non-Ex / Ex i / Ex d: Non-Ex / Ex i / Ex d: Non-Ex / Ex i / Ex d: Non-Ex / Ex i / Ex d:
10…30 VDC; min/max. value for an output of 22 mA at the terminal (additional
power supply needed – output only)
Cable entry M20×1.5; ½ NPT
G ½ (not for FM- and CSA-approved devices. Not for stainless steel housings.)
M25×1.5 (for stainless steel housings only)
Cable gland Standard: none
Options: M20×1.5 (for non-Ex and Ex-approved devices with M20×1.5 and M25×1.5
cable entries); others are available on request
Cable entry capacity (terminal) 0.5…1.5 mm²