beautypg.com

Installation – KROHNE OPTIFLEX 1300C EN User Manual

Page 46

background image

3

INSTALLATION

46

OPTIFLEX 1300 C

www.krohne.com

03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en

3.8.4 How to install a device with a flange connection

Equipment needed:

• Device
• Gasket (not supplied)
• Wrench (not supplied)

• Make sure that the flange on the nozzle is level.
• Make sure that you use the applicable gasket for the flange and the process.
• Align the gasket correctly on the flange facing of the nozzle.
• Lower the probe carefully into the tank.

i

For more data on cable probes, refer to

How to install a cable probe in the tank

on page 48.

• Tighten the flange bolts.

i

Refer to local rules and regulations for the correct torque to apply to the bolts.

Figure 3-36: Flange connection

See also other documents in the category KROHNE Equipment: