KROHNE OPTIFLEX 1300C EN - Manual (Page 15)

DEVICE DESCRIPTION
2
15
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
2.3 Visual Check
If the device is supplied with an FKM/FPM gasket, there is no symbol on the side of the process
connection.
INFORMATION!
Inspect the packaging carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
Figure 2-3: Visual check
1 Device nameplate (for more data, refer to Non-Ex nameplate on page 16)
2 Process connection data (size and pressure rating, material reference and heat number)
3 Gasket material data - refer to the illustration that follows
Figure 2-4: Symbols for the supplied gasket material (on the side of the process connection)
1 EPDM
2 Kalrez
® 6375
WARNING!
• If the display screen glass is broken, do not touch.
• If the device has to measure the level of dangerous products (ammonia etc.), we recommend
that the device has the Metaglas
® option.
• If the device has to measure the level of products where there is a risk of electrostatic
discharge, we recommend that the device has the ESD (electrostatic discharge) protection
option.