KROHNE OPTIFLEX 1300C EN - Manual (Page 84)

6
OPERATION
84
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
Data dependencies for the 4 mA settings of outputs 1 and 2
C.5.2 C.5.2 C.5.2 C.5.2 Passwords Passwords Passwords Passwords To change user passwords, refer to To change user passwords, refer to To change user passwords, refer to To change user passwords, refer to
these menu items. these menu items. these menu items. these menu items.
C5.2.2 Supervisor This changes the supervisor password.
Push the buttons up to 6 times in any
order. This will be the new password.
To confirm the change, enter the new
password a second time.
[>>>>], [^ ^ ^ ^], [ ],
[ ], [> >>>] and [^ ^ ^ ^]
C.6 Reset
C.6.3 Restart If the device does not operate correctly,
start the unit again. Push [^ ^ ^ ^] to
confirm.
1 Units and range depend on the output function, length unit and volume unit selected. See also the table of data dependencies for the
4 mA settings in this section.
2 Units and range depend on the output function, length unit and volume unit selected. See also the table of data dependencies for the
20 mA settings in this section.
Output function Minimum value Maximum value Default
Level 0 m <20 mA Setting for Level 0 m
Volume 0.00 m³ <20 mA Setting for Volume 0 m³
Mass 0.00 kg <20 mA Setting for Mass 0 kg
Distance 0 m <20 mA Setting for distance 0 m
Interface Level 0 m <20 mA Setting for Interface Level 0 m
Interface Distance 0 m <20 mA Setting for Interface Distance 0 m
Interface Volume 0.00 m³ <20 mA Setting for Interface Volume 0 m³
Interface Mass 0.00 kg <20 mA Setting for Interface Mass 0 kg
Ullage Volume 0.00 m³ <20 mA Setting for Ullage Volume 0 m³
Ullage Mass 0.00 kg <20 mA Setting for Ullage Mass 0 kg
Layer 0 m <20 mA Setting for Layer 0 m
Layer Volume 0.00 m³ <20 mA Setting for Layer Volume 0 m³
Layer Mass 0.00 kg <20 mA Setting for Layer Mass 0 m³
Menu
No. Function Function description Selection list Default