KROHNE OPTIFLEX 1300C EN - Manual (Page 72)

6
OPERATION
72
OPTIFLEX 1300 C
www.krohne.com 03/2014 - 4000172306 - HB OPTIFLEX 1300 R07 en
If you push the buttons for 1 second, you can use these hotkey functions:
Hotkey functions in supervisor mode
How to save settings
• When you have changed parameters in all the necessary menu items, push [^ ^ ^ ^] to accept the
new parameter.
• Push [>>>>] and [ ] at the same time to go back to the Save settings Save settings Save settings Save settings screen.
• The device will ask you to save or cancel your settings. Select Save Save Save Save to accept the new settings
or Cancel Cancel Cancel Cancel to reject them.
i The display goes back to operator mode.
6.3.4 Menu overview
Button Description Function
Right Create a quick link 1
Enter -
Down -
Up Screen displays information in English 2
Esc (Escape) Go back to the operator mode
1 Make a selection from the Advanced Setup menu list
2 Push this button for 3 seconds
A Quick Setup
A.1 Setup Mode
A.2 Quick Link 1 (default: Error Records)
A.3 Quick Link 2 (default: Contrast)
A.4 Quick Link 3 (default: Language)
A.5 Quick Link 4 (default: Length Unit)
A.6 Quick Link 5 (default: Display Mode)
B Test
B.1 Test
B.2 Information
C Advanced Setup
C.1 Installation Setup
C.3 Output 1 (HART)
C.4 Output 2 (Passive) 1
C.5 Device Setup
C.6 Reset
1 Optional