Teledyne LeCroy TA660СА - Manual (Page 17)

TA660 User's Manual Catalyst Enterprises, Inc
11
Launching Your TA660
Double click the TA660 Icon in the Program Manager Window.
The TA660 software is pre-configured at the factory to look for LPT2
as the selected port for the analyzer. If the software finds this port
connected to the analyzer program will launch immediately otherwise
the software will ask you to specify which LPT port is connected to
the hardware.
If you have connected your hardware to a different port, select the
that port and click OK to launch the analyzer program.
Find LPT Port If you are not sure which LPT port your hardware is
connected to, click “Search For LPT Port” and let the
software automatically locate the LPT port that is connected
to the hardware. Once the correct LPT port is detected the
analyzer program will launch, perform initialization,
perform a self test and display the analyzer tool bar as
shown in Figure 5