Teledyne LeCroy TA660СА - Manual (Page 142)

TA660 User's Manual Catalyst Enterprises, Inc
136
! TAP (Timing Analysis Parameters) Structure
This structure contains options that are used in State and Timing Analyzer configuration.
The TimingAnalysisParameters structure has the following options:
m_TimingAnalysisBasis Timing Analysis Basis
ESetupTime (default)
EAccessTime
Enable Value of SETUP signal between –160 – 0 in 100ps unit (default
= -70)
T_Clk Value of HOLD signal between 0 – 160 in 100ps unit (default =
0)
! TEM (Timing Error Mask) Structure
This structure contains options that are used in State and Timing Analyzer configuration.
The TEM structure has the following options:
AD[64], CBE[8], PAR, PAR64, PERR, SERR, SDONE, SBO, REQ, GNT, REQ64, ACK64,
STOP, LOCK, RST, INTA, INTB, INTC, INTD, FRAME,TRDY, IRDY, DEVSEL,
IDSEL, PME, USER.
For all fields :
FALSE: Unmask signal
TRUE: Mask signal
The following samples illustrate how to mask/unmask signals
To mask address 63:
taParam.m_TEM.AD[63] = TRUE;
To unmask CBE3:
taParam.m_TEM.CBE[3] = FALSE;
To mask GNT:
taParam.m_TEM.GNT = TRUE;
• ConfigMode
ConfigMode options:
BusAnalyzer State Analyzer Only
TimingAnalyzer State and Timing Analyzer
BusExerciser State Analyzer and Exerciser
An Example to set the mode to State Analyzer and Exerciser:
taParam.m_ConfigMode = BusExerciser;