Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 92)

Training Manual
Micro-Tools Lab
8 - 4
(refer to the MicroTools Installation Lab for additional details on the addition or
removal on communication networks).
Figure 8.4.
Super32 -
Controller
• The Controller’s name (53MC5000 is the default name for the Design Level B
53MC5000 controller) has been read from the controller by Super32. This name is
stored as part of the controller’s database.
• Click on the “+” by the controller name to view the other tags configured within
the controller. As you can see this is forming a tree of detail. Refer to the figure
above.
• The frame on the right side of the display window shows details about highlighted
selection on the left side of the display window, in this case the controller detail.
• Display of the Network and the controller and its tags indicate that the Controller
is online with the computer and Super32.
• The Super32 application also has menus and tools for accessing the Network and
Controllers online, uploading & downloading controller databases and additional
tools for editing tag within the controllers.
2. Launch Micro-Tools: Having made sure that the Controller is online with Super32, we
will launch Micro-Tools and begin configuring the controller now. MicroTools can be
initiated from within Super32 (if previously setup for this function) or from within the
Windows program group. We will initiate MicroTools from the program group.
• Select Programs from the Windows Start menu. Select Micro-Tools from the
menu and select Micro-Tools from the sub menu.