Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 168)

Training Manual
F-TRAN Programming Lab
10- 22
UNITS \
MOVXY 25 55
PRINT C116 \ DISPLAY LOOP 0 LOWER
LIMIT \
MOVXY 6 56
VBAR C100 100.0 / 30.0 * $ 30 11 \ DRAW TANK FILLING BASED
ON PROCESS VARIABLE \
MOVXY 22 65
PRINT C102 $ \ DISPLAY LOOP 0 PROCESS
OUTPUT \
E \ End of Program \
• Compile the program by clicking on the Compile button on the editor. Assign a
Display Function Index of 50 to this program when prompted.
Figure 10.32.
Display F-TRAN
FIX Number
• Click on the OK button after typing the FIX number. Click the Close button on the
editor to close the editor.
4. Build the F-TRAN programs: We will next build both the Control and Display F-TRAN
programs.
• Select the controller from the project tree and then click on the F-TRAN Image
item from the window on the right as shown in the next figure.
• Right-click on the F-TRAN Image item to display a sub-menu as shown below:
Figure 10.33.
F-TRAN Build
• Select the item Build from this menu to build the programs. The Build option
menu will be displayed as shown in the next figure:
Figure 10.34.
F-TRAN Build