Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 140)

Training Manual
F-CIM Lab
9 - 26
Figure 9.24.
FCIM Editor
#
In the Function block selection list, the modules are organized by their function. As an
example all the inputs are grouped together. If you left mouse click on the Input
grouping the list will include ANI and CCI. No attempt is made to distinguish ANI 0
from ANI1 or ANI2, etc. The module number is assigned after the module is dropped.
2. Place an ANI module on the editor screen:
• Select the ANI module by left mouse clicking on ANI. Once selected, you do not
have to hold down on the mouse. As you move the cursor away from the selection
list you will see a change in the cursor indicating a module is being moved around.
• Find a spot on the drawing area and left mouse click to drop the module. You will
notice that a module has been placed on the drawing and that the ANI is ready to
drop another copy of the ANI. See the next figure. To deselect the ANI module
selection, right mouse click.
Figure 9.25.
FCIM BUILD 2
#
If the size of your work area is not large enough, you can zoom out to view more area in
your work area. The zoom command can be selected from the tool bar at the top of the
window. The zoom out will appear as a magnifying lens with a “-“ sign in the center.
The zoom in is a magnifying glass with a “+” in the center. If you need to reposition the