Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 154)

Training Manual
F-TRAN Programming Lab
10- 8
• Left click on the controller folder in the project tree to select it. A menu will be
displayed on the right hand side of the project window.
• Right mouse click on the F-TRAN Image item in the menu. A drop down menu as
shown in the next figure will appear.
Figure 10 .7.
F-TRAN Build
• Select Build from this menu to build the image. The Build window will be
displayed next as shown below: This window has several buttons for features to
choose from.
• Select the Control F-TRAN Programs features from the options available from this
window by clicking the square button. To the right of this selection is another
button with 3 dots on it. Click on it.
Figure 10.8.
Build components
Selection