Micromod Micro-DCI: 53MC5000 Training Manual User Manual

Page 127

Text mode
Original mode

Training Manual

F-CIM Lab

9 - 13

Figure 9 .8.

FCIM BUILD

• The bottom line will display STEP? This means that you are prompted to enter the

STEP number to modify. Use the UP/DOWN (Setpoint Increase or Setpoint
Decrease) pushbuttons along with the LEFT/RIGHT arrow (Output Increase or
Output Decrease) pushbuttons to select step number 00.

• Press the F3 to accept step 00.

Figure 9.9.

FCIM BUILD

• A controller will display the screen containing the parameters for this particular

step. The step number is at the top, the function module ID (Function Code)